BIZOMAT WHS · Work Health & Safety Management System
Workplace health and safety, inside your ERP
Live Available, some modules planned: the core works today in BIZOMAT ERP.
Manage workplace safety, incidents, hazards, risk assessments, inspections, contractors, training, corrective actions and regulatory compliance from one connected platform.
Working today inside BIZOMAT ERP (Release 1): hazard reporting from a phone and the hazard register; risk assessments (JSA, JHA, SWMS and nine more kinds) on the company’s own risk matrix with the hierarchy of controls; incidents and near misses with investigations by five whys and fishbone; the regulator notification record (the decision is made by an authorised person, and the submission is recorded as it was made: BIZOMAT does not submit to regulators); the actions register with evidence; confidential health records seen only by health officers; and jurisdiction packs for Australia’s Commonwealth, states and territories (Victoria under its own OHS laws) with skeleton packs for New Zealand, the United Kingdom, Canada, Singapore and South Africa. Every legal instrument and rule is Not verified until a competent person verifies it against the official source. Planned: inspections and audits, documents and SWMS acknowledgement, permits to work, contractors and visitors, training, chemicals, plant safety, PPE, emergency management, consultation, health surveillance and the compliance register.
Read this first
What BIZOMAT WHS does, and does not, do
- It keeps your health and safety records and takes them through their steps, with the history of every change.
- Its legal packs are a starting point, not legal advice. Every instrument and rule is Not verified until a competent person verifies it against the official source.
- It never decides whether an incident must be notified: an authorised person in your company does, with reasons.
- It does not submit notifications to regulators. You notify the regulator, then record how and when, and the regulator’s reference.
- Using it does not by itself make a business meet its legal duties, and no independent body has assessed it.
Release 1, the core
What works today
Every part below is labelled. Within a part, what is not built yet is labelled Planned.
What the labels mean
- Live Works today in BIZOMAT.
- Connected Works today by linking two BIZOMAT systems, without copying records.
- In development Being built: parts exist, but it is not switched on for everyone yet.
- Planned Designed, not built. Not available today.
Hazard register
LiveLive: works today in BIZOMAT ERP, under Health and Safety.
Anyone in the company reports a hazard from a phone: a title, the kind of hazard, where it is and a photo. A WHS officer rates it on the company’s risk matrix, assigns controls as actions, and closes it once the controls are verified.
- Twenty categories, from machinery and working at heights to psychosocial hazards and fatigue Live
- Reported, assessment, controls assigned, implementation, verification, closed Live
- Photos and documents, notes and consultation comments Live
- Links to risk assessments, incidents and Maintenance work orders Live
- Psychosocial, violence and fatigue reports kept confidential Live
Risk assessments and the risk register
LiveLive: works today in BIZOMAT ERP, under Health and Safety.
Job safety analyses, safe work method statements and ten other kinds of assessment: the task in steps, each hazard with the harm and the people affected, likelihood by consequence on the company’s own matrix, controls tagged with the hierarchy of controls, and the residual risk. A WHS manager who did not draft it approves it.
- JSA, JHA, SWMS, task, workplace, plant, chemical, manual handling, construction, environmental, psychosocial and contractor Live
- A configurable risk matrix (5 by 5 by default), with versions Live
- A warning when a high risk relies on administrative controls and PPE alone Live
- Review dates, and revisions when the work, equipment, controls or circumstances change Live
- Heat maps of initial and residual risk Live
Incidents and investigations
LiveLive: works today in BIZOMAT ERP, under Health and Safety.
Injuries, illnesses, near misses, dangerous occurrences, property damage, environmental, vehicle, contractor, visitor and psychosocial incidents, reported from a phone and taken through immediate response, classification, investigation, corrective action, verification and closure. A serious incident alerts the WHS managers at once.
- Investigations with a team, a timeline, witness statements and evidence Live
- Five whys and fishbone, contributing factors and failed controls Live
- Every change after classification recorded by the database; incidents are never deleted Live
- Medical treatment details in a confidential health record that only health officers read Live
Regulator notification records
LiveLive: works today in BIZOMAT ERP, under Health and Safety.
An incident is checked against the rules of its own site’s jurisdictions. Only a rule that is verified and in effect on the incident’s date flags it as possibly notifiable and works out a due time. An authorised person decides, with reasons; the checklist, the submission (method, time, who, the regulator’s reference) and its confirmation are recorded. BIZOMAT does not submit to regulators, and never decides for you.
- A flag and a due time only from a verified rule Live
- "Deadline not verified: check with the regulator" for every other rule Live
- The decision, the checklist, the submission and the confirmation file Live
- Submitting to a regulator electronically Planned
Actions register
LiveLive: works today in BIZOMAT ERP, under Health and Safety.
Corrective, preventive and improvement actions from hazards, incidents, investigations and risk assessments: a responsible person, a priority, a due date and the evidence needed. An action that needs evidence cannot be completed without it; someone else verifies and closes it. Overdue actions are escalated in the app and show in My Work.
- Evidence required before completion, checked on the server Live
- Verification and closure by someone other than who did it Live
- Actions from inspections, audits, meetings and contractors Planned
Jurisdictions and legal content
LiveLive: works today in BIZOMAT ERP, under Health and Safety.
Each site is given its jurisdictions. Packs list the regulator and the instruments (legislation, regulations, approved codes of practice, standards, government guidance and model laws, each labelled for what it is) and versioned rules with effective dates. A company adds its own policies beside them. Every instrument and rule is shown as Not verified until a competent person verifies it against the official source.
- Australia: the Commonwealth, New South Wales, Queensland, South Australia, Tasmania, Western Australia, the ACT and the Northern Territory, and Victoria under its own OHS laws Live
- Skeleton packs: New Zealand, the United Kingdom (Great Britain), Canada (federal and four provinces), Singapore and South Africa Live
- A controlled update: draft, review, activation and verification of each rule version Live
- Rules verified against the official sources Planned
Dashboard
LiveLive: works today in BIZOMAT ERP, under Health and Safety.
Real counts from the records only, filtered by site, department, dates, incident type and risk level: active hazards, high and critical risks, open incidents, near misses, investigations, notifications to decide, open and overdue actions, monthly trends, and site and department comparisons. Injury frequency rates are shown once hours worked are entered.
- Lost-time and recordable injury frequency rates from the hours worked entered Live
- Inspections, training, contractors, permits and compliance obligations on the dashboard Planned
Later releases
Planned, not built
Designed, not built. Nothing here is available today.
- Workplace inspections and audits Planned
- Safe work procedures and document control, with SWMS acknowledgement Planned
- Permits to work Planned
- Contractor and visitor safety Planned
- Training, competency and licences Planned
- Chemicals and safety data sheets Planned
- Plant and equipment safety Planned
- PPE management Planned
- Emergency management Planned
- Worker consultation and safety committees (consultation comments on records work today) Planned
- Health surveillance Planned
- The compliance and obligations register Planned
Who uses it
A role for each person, checked on the server
WHS roles are given with the other ERP roles in Administration. Every action is checked on the server; a role that may not do something is told who can.
- Everyone in the company
- Reports a hazard or an incident from a phone and follows their own reports.
- WHS officers and supervisors
- Rate hazards, classify incidents, draft risk assessments, raise, verify and close actions.
- WHS managers
- Approve assessments and investigations, decide whether an incident is notifiable, and keep the settings.
- Incident investigators
- Investigate incidents: the team, timeline, statements, evidence and root cause.
- Health and safety representatives
- Read the registers and add consultation comments.
- Health officers
- The only people who read medical treatment details.
Safety workflows
From a report to a verified fix
An example from the example company: a setter reports an open pinch point at a press brake from a phone. A WHS officer rates it high, assigns an interlocked guard as an engineering control, and closes it once the guard is fitted and checked. A cut to a worker’s hand is investigated by five whys and fishbone, and the corrective actions deburr the parts before they reach the table.
A hazard
- Reported
- Assessment
- Controls assigned
- Implementation
- Verification
- Closed
An incident
- Reported
- Immediate response
- Classification
- Investigation
- Corrective action
- Verification
- Closure
A regulator notification
- Rules of the site checked
- Flag from a verified rule
- Decision by an authorised person
- Checklist
- Submission recorded





Related systems
Working with the ERP, Maintenance and Projects
Nothing is copied: sites and assets stay in Maintenance, departments in Company accounts, and your tasks in Projects.
BIZOMAT ERP
- Health and Safety in the module rail, the dashboard card, Reports and Administration Live
- WHS roles given with the other ERP roles Live
- The company’s departments on hazards and incidents Live
BIZOMAT Manufacturing and Operations
- Sites and assets from Maintenance, read only Connected
- Hazards linked to Maintenance work orders Connected
- A failed safety inspection raising a work order Planned
BIZOMAT Projects
- Your health and safety actions, hazards, investigations and notifications in My Work Connected
Questions
About BIZOMAT WHS
- Is it a separate application?
- No. BIZOMAT WHS is the Health and Safety module of BIZOMAT ERP, with the same account, companies and roles. There is no other sign-in.
- Does BIZOMAT tell me whether an incident must be notified?
- No. It checks the incident against the rules of its site’s jurisdictions and, only where a rule is verified and in effect, flags it and works out the due time. An authorised person in your company decides, with reasons, and records the submission. BIZOMAT does not submit to regulators.
- Is the legal content checked?
- Not yet. Every instrument and rule is shown as Not verified until a competent person verifies it against the official source, and BIZOMAT computes no deadline from a rule that is not verified. It is a starting point, not legal advice. Using BIZOMAT WHS does not by itself make a business meet its legal duties, and no independent body has assessed it.
- Who sees medical details?
- Only health officers. Supervisors, WHS managers and the person who reported the incident do not, and the history records who changed a health record, never what it says.
- Can a report be confidential?
- Yes, for psychosocial hazards and incidents such as bullying or harassment. The reporter is told before sending who will see it: the WHS managers and health officers.
- Which countries does it cover?
- Australia first: the Commonwealth, every state and territory, and Victoria under its own laws. New Zealand, the United Kingdom, Canada, Singapore and South Africa have skeleton packs: the regulator and the primary legislation. None is verified yet.
- Can I try it?
- Yes. The example company in BIZOMAT ERP has invented health and safety records: a hazard being controlled, an approved JSA, a near miss and an injury with its investigation, and a notification record marked as example data. Only you see it.
- What is still planned?
- Inspections and audits, documents and SWMS acknowledgement, permits to work, contractors and visitors, training, chemicals, plant safety, PPE, emergency management, consultation, health surveillance and the compliance register. Each is labelled Planned until it is built and tested.
Step by step: the BIZOMAT WHS user guide. Missing something? Tell us what you need it for.
Getting started: report the first hazard today.
Opens inside BIZOMAT ERP, in the Health and Safety module. Give each site its jurisdiction and the WHS roles in Administration, then anyone in the company can report from a phone.